Difference between revisions of "Hardkernel ODROID-U3"
|Line 1:||Line 1:|
Latest revision as of 20:20, 11 May 2015
|Dimensions||83 x 48 mm|
|SoC||Samsung Exynos 4412 Prime|
|DRAM||2 GiB LPDDR2 @ 880 MHz|
|Power||Maxim MAX77686 power management IC, OnSemi NCP372 power protection IC, DIODES AP2411-MP-13 USB power protection IC, 5V / 2A DC 2.5mm x 0.8mm input|
|Audio||Maxim MAX98090, 3.5mm headphone jack, HDMI|
|Network||10/100 Mbit ethernet via Microchip LAN9730|
|Storage||Micro-SD slot, eMMC module socket|
|USB (Host/OTG)||3x USB 2.0 Host via Microchip USB3503A, 1x Micro-USB 2.0|
|Other||NXP IP4791CZ12 HDMI transmitter interface protector with level shifter|
Please see the Hardkernel_ODROID-U2 page for instructions about setting up the device. The U2 and U3 are nearly identical in terms of software, so all setup instructions concerning u-boot and kernel are the same. Some small details differ (like routing of USB ports) but for both the vendor or a current mainline kernel this detail doesn't have an effect on the setup.
The board name "ODROID-U3" including the revision number is clearly printed on the bottom side of the board (the upper side is where the SoC cooler is located).